Advanced Installation Options

This guide helps you install ABACUS with advanced features. Please make sure to read the easy-installation guide before.

Build with Libxc

ABACUS use exchange-correlation functionals by default. However, for some functionals (such as HSE hybrid functional), Libxc is required.

Dependency: Libxc >= 5.1.7 .

Note: Building Libxc from source with Makefile does NOT support using it in CMake here. Please compile Libxc with CMake instead.

If Libxc is not installed in standard path (i.e. installed with a custom prefix path), you can set Libxc_DIR to the corresponding directory.

cmake -B build -DLibxc_DIR=~/libxc

Build with DeePKS

If DeePKS feature is required for DeePKS-kit, the following prerequisites and steps are needed:

  • C++ compiler, supporting C++14 (GCC >= 5 is sufficient)

  • CMake >= 3.18

  • LibTorch with cxx11 ABI supporting CPU

  • Libnpy

cmake -B build -DENABLE_DEEPKS=1 -DTorch_DIR=~/libtorch/share/cmake/Torch/ -Dlibnpy_INCLUDE_DIR=~/libnpy/include

CMake will try to download Libnpy if it cannot be found locally.

Build with DeePMD-kit

Note: This part is only required if you want to load a trained DeeP Potential and run molecular dynamics with that. To train the DeeP Potential with DP-GEN, no extra prerequisite is needed and please refer to this page for ABACUS interface with DP-GEN.

If the Deep Potential model is employed in Molecule Dynamics calculations, the following prerequisites and steps are needed:

cmake -B build -DDeePMD_DIR=~/deepmd-kit -DTensorFlow_DIR=~/tensorflow

deepmd_c/deepmd_cc and tensorflow_cc libraries would be called according to DeePMD_DIR and TensorFlow_DIR, which is showed in detail in this page. If TensorFlow_DIR is not defined, it will be the same as DeePMD_DIR. Note that tensorflow_cc is not required if deepmd_c is found.

Build with LibRI and LibComm

The new EXX implementation depends on two external libraries:

These two libraries are added as submodules in the deps folder. Set -DENABLE_LIBRI=ON to build with these two libraries.

If you prefer using manually downloaded libraries, provide -DLIBRI_DIR=${path to your LibRI folder} -DLIBCOMM_DIR=${path to your LibComm folder}.

Build Unit Tests

To build tests for ABACUS, define BUILD_TESTING flag. You can also specify path to local installation of Googletest by setting GTEST_DIR flags. If not found in local, the configuration process will try to download it automatically.

cmake -B build -DBUILD_TESTING=1

After building and installing, unit tests can be performed with ctest.

To run a subset of unit test, use ctest -R <test-match-pattern> to perform tests with name matched by given pattern.

Build Performance Tests

To build performance tests for ABACUS, define ENABLE_GOOGLEBENCH flag. You can also specify the path to a local installation of Google Benchmark by setting BENCHMARK_DIR flags. If not found locally, the configuration process will try to download it automatically.

cmake -B build -DENABLE_GOOGLEBENCH=1

Google Benchmark requires Google Test to build and run the tests. When setting ENABLE_GOOGLEBENCH to ON, BUILD_TESTING is automatically enabled. After building and installing, performance tests can be executed with ctest.

Build with CUDA support

Extra prerequisites

To build NVIDIA GPU support for ABACUS, define USE_CUDA flag. You can also specify path to local installation of CUDA Toolkit by setting CMAKE_CUDA_COMPILER flags.

cmake -B build -DUSE_CUDA=1 -DCMAKE_CUDA_COMPILER=${path to cuda toolkit}/bin/nvcc

Build math library from source

Note: This flag is enabled by default. It will get better performance than the standard implementation on gcc and clang. But it will be disabled when using Intel Compiler since the math functions will get wrong results and the performance is also unexpectly poor.

To build math functions from source code, instead of using c++ standard implementation, define USE_ABACUS_LIBM flag.

Currently supported math functions: sin, cos, sincos, exp, cexp

cmake -B build -DUSE_ABACUS_LIBM=1

Build with PEXSI support

ABACUS supports the PEXSI library for gamma only LCAO calculations. PEXSI version 2.0.0 is tested to work with ABACUS, please always use the latest version of PEXSI.

To build ABACUS with PEXSI support, you need to compile PEXSI (and its dependencies) first. Please refer to the PEXSI Installation Guide for more details. Note that PEXSI requires ParMETIS and SuperLU_DIST.

After compiling PEXSI, you can set ENABLE_PEXSI to ON. If the libraries are not installed in standard paths, you can set PEXSI_DIR, ParMETIS_DIR and SuperLU_DIST_DIR to the corresponding directories.

cmake -B build -DENABLE_PEXSI=ON -DPEXSI_DIR=${path to PEXSI installation directory} -DParMETIS_DIR=${path to ParMETIS installation directory} -DSuperLU_DIST_DIR=${path to SuperLU_DIST installation directory}

Build ABACUS with make

Note: We suggest using CMake to configure and compile.

To compile the ABACUS program using legacy make, users need to specify the location of the compilers, headers and libraries in source/Makefile.vars:

# This is the Makefile of ABACUS API
#======================================================================
# Users set
#======================================================================
CXX = mpiicpc
# mpiicpc:   compile intel parallel version
# icpc:      compile intel sequential version
# make: ELPA_DIR, ELPA_INCLUDE_DIR, CEREAL_DIR must also be set.
# make pw: nothing need to be set except LIBXC_DIR
#
# mpicxx:    compile gnu parallel version
# g++:       compile gnu sequential version
# make: FFTW_DIR, OPENBLAS_LIB_DIR, SCALAPACK_LIB_DIR, ELPA_DIR, ELPA_INCLUDE_DIR, CEREAL_DIR must also be set.
# make pw: FFTW_DIR, OPENBLAS_LIB_DIR must be set.

# GPU = OFF  #We do not support GPU yet
# OFF:  do not use GPU
# CUDA: use CUDA
#======================================================================



#--------------------  FOR INTEL COMPILER  ----------------------------
## ELPA_DIR          should contain an include folder and lib/libelpa.a
## CEREAL_DIR        should contain an include folder.
#----------------------------------------------------------------------

ELPA_DIR      = /usr/local/include/elpa-2021.05.002
ELPA_INCLUDE_DIR = ${ELPA_DIR}/elpa

CEREAL_DIR    = /usr/local/include/cereal


##-------------------  FOR GNU COMPILER  ------------------------------
## FFTW_DIR          should contain lib/libfftw3.a.
## OPENBLAS_LIB_DIR  should contain libopenblas.a.
## SCALAPACK_LIB_DIR should contain libscalapack.a
## All three above will only be used when CXX=mpicxx or g++
## ELPA_DIR          should contain an include folder and lib/libelpa.a
## CEREAL_DIR        should contain an include folder.
##---------------------------------------------------------------------

# FFTW_DIR = /public/soft/fftw_3.3.8
# OPENBLAS_LIB_DIR   = /public/soft/openblas/lib
# SCALAPACK_LIB_DIR  = /public/soft/openblas/lib

# ELPA_DIR      = /public/soft/elpa_21.05.002
# ELPA_INCLUDE_DIR = ${ELPA_DIR}/include/elpa-2021.05.002

# CEREAL_DIR    = /public/soft/cereal


##-------------------  OPTIONAL LIBS  ---------------------------------
## To use DEEPKS: set LIBTORCH_DIR and LIBNPY_DIR
## To use LIBXC:  set LIBXC_DIR which contains include and lib/libxc.a (>5.1.7)
## To use DeePMD: set DeePMD_DIR and TensorFlow_DIR
## To use LibRI:  set LIBRI_DIR and LIBCOMM_DIR
##---------------------------------------------------------------------

# LIBTORCH_DIR  = /usr/local
# LIBNPY_DIR    = /usr/local

# LIBXC_DIR    		= /public/soft/libxc

# DeePMD_DIR = ${deepmd_root}
# TensorFlow_DIR = ${tensorflow_root}

# LIBRI_DIR     = /public/software/LibRI
# LIBCOMM_DIR   = /public/software/LibComm

##---------------------------------------------------------------------
# NP = 14 # It is not supported. use make -j14 or make -j to parallelly compile
# DEBUG = OFF
# Only for developers
# ON:   use gnu compiler and check segmental defaults
# OFF:  nothing
#======================================================================

For example, below is a case where the Intel C++ compiler, Intel MPI and CEREAL are used, along with Intel MKL library. The file Makefile.vars can be set as follows:

CXX = mpiicpc #(or CXX = icpc)
ELPA_DIR      = /public/soft/elpa_21.05.002
ELPA_INCLUDE_DIR = ${ELPA_DIR}/include/elpa-2021.05.002
CEREAL_DIR    = /public/soft/cereal

When CXX=mpiicpc, a parallel version will be compiled. When CXX=icpc, a sequential version will be compiled.

Another example is where the Gnu C++ compiler, MPICH, OPENBLAS, ScaLAPACK, ELPA and CEREAL are used:

CXX = mpicxx/g++
FFTW_DIR = /public/soft/fftw_3.3.8
OPENBLAS_LIB_DIR   = /public/soft/openblas/lib
SCALAPACK_LIB_DIR  = /public/soft/openblas/lib
ELPA_DIR      = /public/soft/elpa_21.05.002
ELPA_INCLUDE_DIR = ${ELPA_DIR}/include/elpa-2021.05.002
CEREAL_DIR    = /public/soft/cereal

When CXX=mpicxx, a parallel version will be compiled. When CXX=g++, a sequential version will be compiled.

Except modifying Makefile.vars, you can also directly use

make CXX=mpiicpc ELPA_DIR=/public/soft/elpa_21.05.002 \
ELPA_INCLUDE_DIR=${ELPA_DIR}/include/elpa-2021.05.002 \
CEREAL_DIR=/public/soft/cereal

ABACUS now support full version and pw version. Use make or make abacus to compile full version which supports LCAO calculations. Use make pw to compile pw version which only supports pw calculations. For pw version, make pw CXX=mpiicpc, you do not need to provide any libs. For make pw CXX=mpicxx, you need provide FFTW_DIR and OPENBLAS_LIB_DIR.

Besides, libxc and deepks are optional libs to compile abacus. They will be used when LIBXC_DIR is defined like

LIBXC_DIR = /public/soft/libxc

or LIBTORCH_DIR and LIBNPY_DIR like

LIBTORCH_DIR  = /usr/local
LIBNPY_DIR    = /usr/local

After modifying the Makefile.vars file, execute make or make -j12 to build the program.

After the compilation finishes without error messages (except perhaps for some warnings), an executable program ABACUS.mpi will be created in directory bin/.

Add Libxc Support

The program compiled using the above instructions do not link with LIBXC and use exchange-correlation functionals as written in the ABACUS program. However, for some functionals (such as HSE hybrid functional), LIBXC is required.

To compile ABACUS with LIBXC, you need to define LIBXC_DIR in the file Makefile.vars or use

make LIBXC_DIR=/pulic/soft/libxc

directly.

Add DeePKS Support

To compile ABACUS with DEEPKS, you need to define LIBTORCH_DIR and LIBNPY_DIR in the file Makefile.vars or use

make LIBTORCH_DIR=/opt/libtorch/ LIBNPY_DIR=/opt/libnpy/

directly.

Add DeePMD-kit Support

Note: This part is only required if you want to load a trained DeeP Potential and run molecular dynamics with that. To train the DeeP Potential with DP-GEN, no extra prerequisite is needed and please refer to this page for ABACUS interface with DP-GEN.

To compile ABACUS with DeePMD-kit, you need to define DeePMD_DIR and TensorFlow_DIR in the file Makefile.vars or use

make DeePMD_DIR=~/deepmd-kit TensorFlow_DIR=~/tensorflow

directly.

deepmd_c/deepmd_cc and tensorflow_cc libraries would be called according to DeePMD_DIR and TensorFlow_DIR, which is showed in detail in this page. If TensorFlow_DIR is not defined, it will be the same as DeePMD_DIR. Note that tensorflow_cc is not required if deepmd_c is found.

Add LibRI Support

To use new EXX, you need two libraries: LibRI and LibComm and need to define LIBRI_DIR and LIBCOMM_DIR in the file Makefile.vars or use

make LIBRI_DIR=/public/software/LibRI LIBCOMM_DIR=/public/software/LibComm

directly.